designed & dimensioned in millimeters[inches] do not scale from this print fs5-xx-xx.x-x-dv-xx-x-tr no of positions -15, -30, *-35, *-50 (per row) row specification -dv: double vertical lead style -04.0: 4mm plating specification -l: light selective, 10 au / 50 ni min on contact, matte tin on tail packaging -tr: tape & reel (see notes 3,4 & 5) option -k: polyimide pad (see fig 3, sht 3) weld tab -th: thru hole (use wt-62-xx.x-th-x) *-sm: surface mount (use wt-62-xx.x-sm-x) (* = not tooled) "a" ref "b" ref 1.550 .061 ref 2.350 .093 ref "c" eq. spcs @ 0.50 = "d" .020 0.50 (typ) .020 0.65 .026 ref 1.50 .059 x 45 ref 9.40 .370 ref "a" "a" 01 02 c c position 1 indicator c l c l 29 30 c "g" - 0.20 +0.13 4.40 .173 ref 1.40 .055 1.27 .050 ref 0.45 ref .018 0.12 (typ) ref .005 "b" "b" wt-62-xx.x-th-x fs5-xx-xx.x-x fs5-xx-xx.x-dv-x c c c l c fig 1 fs5-15-04.0-x-dv-th-x-tr shown c sheet of unless otherwise specified, dimensions are in millimeters[inches]. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.13 [.005] x.xxx: 0.051 [.0020] material: fs5 socket floating assembly by: fs5-xx-xx.x-x-dv-xx-x-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 08/04/2009 3 1 sheet scale: 6:1 insulator: lcp, color: black ul 94 vo contact: becu wt: phos bronze f:\dwg\misc\mktg\fs5-xx-xx.x-x-dv-xx-x-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 fromparent+e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. push out force 2.22n [.50lbs]. 3. tape & reel will be supplied whether or not -tr is specified. 4. for quantities up to 49 pcs., no leader, trailer or eia-481 reel will be supplied. 5. for quantities of 50 to 124 pcs., no leader, trailer or eia-481 reel will be supplied. revision c
1.00 0.07 .039 .003 2.42 .095 ref 3.45 ref .136 0.56 ref .022 9.40 .370 0.30 ref .012 6.65 ref .262 2.20 .087 section "a"-"a" scale 10 : 1 c c c c-304-xx.x-x c l (measure all 4 signal pin locations) c 0.10 [.004] 1.32 .052 ref 0.50 (typ) .020 "f" 1.09 ref .043 1.32 .052 ref "e" ref 1.60 .063 ref section "b"-"b" c c c l c l sheet of fs5 socket floating assembly by: fs5-xx-xx.x-x-dv-xx-x-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 08/04/2009 3 2 sheet scale: 6:1 revision c f:\dwg\misc\mktg\fs5-xx-xx.x-x-dv-xx-x-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 fromparent+e-mail: info@samtec.com code: 55322
"g" 1.10 ref .043 fig 2 -sm weld tab (fs5-15-04.0-x-dv-sm-x-tr shown) (same as fig 1, except as shown) (not tooled) wt-62-xx.x-sm-x c c l 9.79 ref .386 c c c l (applies to wt's and signal pins) 0.10 [.004] "a" ref 9.40 .370 ref 8.25 .325 "h" 0.50 [.020] 0.58 0.50 .023 .020 fig 3 -k: polyimide pad (use k-dot-.325-.450-.005) (fs5-15-04.0-x-dv-th-k-tr shown) c c c l c l 4.53 .178 c l c sheet of fs5 socket floating assembly by: fs5-xx-xx.x-x-dv-xx-x-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 08/04/2009 3 3 sheet scale: 6:1 revision c f:\dwg\misc\mktg\fs5-xx-xx.x-x-dv-xx-x-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 fromparent+e-mail: info@samtec.com code: 55322
|
